Buying a Used Truck in the Inland Empire: What to Check First
Check four things first on any used truck: the frame and underbody, signs of hard towing or hauling, heat related wear from our long Inland Empire summers, and the paperwork that shows how the truck was cared for. Then take a real test drive and have a qualified technician inspect the truck before you sign. That order works for a used F-150 or any other pickup you find in Chino, Ontario or Pomona, and it surfaces problems while you can still walk away. You can browse our used inventory before you visit.
Start underneath: frame and underbody
A truck can look clean on top and tell a different story underneath. Bring a flashlight and look along both frame rails, the crossmembers and the area around the suspension mounts.
- Rust: Light surface rust is common on older trucks. Flaking, scaling or soft spots on the frame are more serious. A truck that spent years where winter roads get salted can show more corrosion than one that stayed in Southern California, so check the history report for where it lived.
- Fresh undercoating: A brand new coat of black spray on an older truck can be routine protection, or it can hide something. Look closely at the edges.
- Repair clues: Bent or kinked frame sections, nonfactory welds, mismatched paint and uneven gaps between body panels can point to past collision damage.
- Leaks: Check for fresh drips or wet spots on the engine, transmission, differentials and transfer case.
Read the bed and hitch for work history
The bed shows how a truck earned its keep. Dents, gouges and scraped paint are normal for a working pickup, but deep damage near the bed floor seams or rust coming through the floor deserves a closer look. If there's a bed liner, peek under its edges where you can.
Open and close the tailgate a few times and make sure it latches cleanly. At the back, look at the hitch receiver. Heavy wear, rust inside the receiver or a worn hitch ball area suggest regular towing. Holes or mounting hardware in the bed for a gooseneck or fifth wheel hitch usually mean the truck pulled big loads.
Look for signs of heavy towing
Towing is why a lot of Inland Empire buyers want a pickup, and plenty of trucks tow responsibly their whole lives. What you want to know is how hard this one worked and whether its maintenance kept up. Watch for:
- A rear end that sits noticeably low, which can point to tired springs or shocks
- Trailer wiring connectors that look heavily used or corroded, or an aftermarket brake controller under the dash
- Transmission fluid that looks dark or smells burnt, if it can be checked
- Hesitant or harsh shifting on your test drive
None of these automatically rules a truck out. They're reasons to ask more questions and look for service records showing fluid changes.
Check tires and brakes
Tires tell you about the truck and about the next few months of your budget. Uneven wear across the tread can mean alignment or suspension issues. Mismatched brands may mean tires were replaced one at a time. Look at the sidewalls for small cracks, and check the date code to see how old the tires are, since age matters as much as tread.
For brakes, look through the wheels at the rotors for deep grooves or a heavy lip on the outer edge. On the drive, pay attention to grinding, squealing, a pulsing pedal or a pull to one side when you stop.
Inland Empire heat: cooling system, battery, rubber and hoses
Long, hot summers are hard on vehicles here, and a truck that towed in that heat worked even harder. Give these areas extra attention:
- Cooling system: Check the coolant level and color when the engine is cool. Look for crusty residue around the radiator, hoses and water pump, which can signal slow leaks.
- Battery: Heat can shorten battery life. Look for corrosion on the terminals and a date label on the battery if there is one.
- Rubber and hoses: Squeeze the radiator and heater hoses when the engine is cool. They should feel firm, not brittle, swollen or mushy. Check belts for cracks and fraying.
- Seals and trim: Sun can dry out door seals, wiper blades and interior plastics. Small stuff, but it adds up.
- Air conditioning: Run it on high. In the Inland Empire, an AC system that struggles is a real problem.
Service records and the vehicle history report
Paperwork fills in what an inspection can't. Ask for maintenance records and look for regular oil changes plus fluid services for the transmission, differentials and coolant. A truck used for towing with steady service records is often a better bet than a lightly used truck with no records at all.
Review the vehicle history report for title issues, reported accidents, number of owners, where the truck was registered and any odometer concerns. Vehicle history reports may not include every incident, so treat the report as a starting point. Ask whether any open recalls have been taken care of.
Test drive tips for a used pickup
- Ask that the engine not be warmed up before you get there, so you can hear a cold start.
- Drive on surface streets and the freeway to check acceleration, shifting and highway stability.
- Listen for clunks over bumps and dips, which can point to worn suspension or steering parts.
- If the truck has four wheel drive, ask to see it engage and disengage.
- Test every window, lock, light, camera and screen.
- Back into a parking space to check visibility and any parking aids.
Get an inspection before you buy
Even a careful walk around can miss things. A prepurchase inspection by a qualified technician can put the truck on a lift, scan for stored trouble codes and check parts you can't easily see. On a pickup that may tow, haul or head out of town on weekends, it's a worthwhile step to take before you sign. Our service department can help you schedule one.
Frequently asked questions
What should I check first on a used truck?
Start underneath with the frame and underbody. Look for heavy rust, nonfactory welds, bent sections and fresh leaks. Problems there are often the most serious and the most expensive, so rule them out before you spend time on anything else.
Start underneath with the frame and underbody. Look for heavy rust, nonfactory welds, bent sections and fresh leaks. Problems there are often the most serious and the most expensive, so rule them out before you spend time on anything else.
How can I tell if a used truck was used for heavy towing?
Look for wear inside the hitch receiver, well used trailer wiring, an aftermarket brake controller and gooseneck or fifth wheel hardware in the bed. A sagging rear end or harsh shifting can be clues too. Towing history isn't a dealbreaker by itself, so ask for service records that show regular fluid changes.
Look for wear inside the hitch receiver, well used trailer wiring, an aftermarket brake controller and gooseneck or fifth wheel hardware in the bed. A sagging rear end or harsh shifting can be clues too. Towing history isn't a dealbreaker by itself, so ask for service records that show regular fluid changes.
Why does Inland Empire heat matter when buying a used truck?
Long, hot summers are hard on the cooling system, battery, hoses, belts and rubber seals. Check coolant condition, feel the hoses when the engine is cool, look for battery corrosion and run the AC on high during your test drive.
Long, hot summers are hard on the cooling system, battery, hoses, belts and rubber seals. Check coolant condition, feel the hoses when the engine is cool, look for battery corrosion and run the AC on high during your test drive.
Is a prepurchase inspection worth it on a used pickup?
For most buyers, yes. A qualified technician can spot hidden issues on a lift and scan for trouble codes that a walk around won't show. That's especially useful on a truck you plan to use for work or towing.
For most buyers, yes. A qualified technician can spot hidden issues on a lift and scan for trouble codes that a walk around won't show. That's especially useful on a truck you plan to use for work or towing.
Ready to start your search?
A used truck that passes these checks can serve you well for work, towing and weekend trips around Southern California. If you plan to trade in your current vehicle, our trade in advisor can give you a starting point. Getting prequalified ahead of time can save time once you find the right truck, and prequalification is subject to credit approval. After you drive home, the Chino Hills Ford service department can keep up with the maintenance, and you can book service online anytime.
Chino Hills Ford is at 4480 Chino Hills Parkway in Chino, serving drivers from Chino Hills, Ontario, Pomona and across the Inland Empire. When you're ready, browse our used inventory and bring this checklist with you. Financing is subject to credit approval.